Marine Log - Garmin 76CS Plus Owner's Manual

M P > M L
AIN AGES ARINE

Marine Log

The Marine Log automatically records your position
and heading while you are traveling in either Power-
boat mode or Sailboat mode. Press PAGE or QUIT
repeatedly to open the Marine Log.
Once you have established
a GPS fix, the Marine Log
records your position and
heading and then records
again every 30 minutes on
the hour and half hour, by
default. Up to 192 entries,
or four days of entries, can
be held in the log at one
time. When the log is full,
new entries are recorded
over the oldest entries.
To review an entry in the log:
1. Highlight the entry you want to review and
press ENTER. The entry's details page opens.
2. Highlight Map and press ENTER to view the
location of this entry on a map.
60
190-00507-00_0A.indd 60
OG
Marine Log and Details
3. Highlight OK and press ENTER to close the
details page.
TIP: When the log details page is open, press the
Rocker key Down to view the details for the next
entry in the log.
While in a sea mode, you can change the record inter-
val to better suit your needs. Generally, the 30 minute
default interval setting is appropriate for most trips. If
you are making a long trip, you may want to set the
interval to 4 hours.
To change the marine log record interval:
1. Highlight the top field and press ENTER.
2. Select the record interval from the list and
press ENTER.
You can manually record an entry at any time without
interrupting the programmed record interval.
To manually record a Marine Log entry:
1. Open the Marine Log and press MENU.
2. Highlight Add Log Entry and press ENTER.
The date and time, and your track, speed, and
position are recorded.
76CS Plus Owner's Manual
2/14/2005 3:33:37 PM