Proximity Points - Garmin 76CS Plus Owner's Manual

B O > C
ASIC PERATION REATING AND

Proximity Points

You can define an alarm circle around a stored
waypoint position. The alarm circle can help
you avoid reefs, rocks, or restricted waters.
If a proximity alarm circle overlaps an existing alarm
circle, a "Proximity Overlaps Another Proximity
Waypoint" message appears. If you enter an alarm cir-
cle overlap, you are only alerted to the closest proxim-
ity waypoint; use caution when navigating these areas.
To add a proximity waypoint:
1. Press MENU twice to open the Main Menu.
2. Highlight Proximity and
press ENTER.
3. Use the Rocker key to
highlight an empty line on
the list and press ENTER.
4. Select the desired point
from the Find Menu.
Highlight Use and press
ENTER.
30
190-00507-00_0A.indd 30
U W
SING AYPOINTS
To clear all alarms from the list, press MENU and
then ENTER.
Adding proximity
alarms.
5. The distance field is now highlighted. Press
ENTER to begin entering the proximity radius.
6. Use the Rocker key to enter a distance value
(up to 99.99 units) and press ENTER.
To turn proximity alarms on or off:
1. Press MENU twice to open the Main Menu.
2. Highlight Proximity and press ENTER.
3. Use the Rocker key to highlight the box next
to Proximity Alarms at the bottom of the page
and press ENTER.
To clear one proximity alarm from the list:
1. Press MENU twice to open the Main Menu.
2. Highlight Proximity and press ENTER.
3. Use the Rocker key to highlight the proximity
alarm you want to clear and press ENTER.
4. Highlight Remove and press ENTER.
5. Confirm the deletion by selecting Yes and then
pressing ENTER.
76CS Plus Owner's Manual
2/14/2005 3:33:24 PM