Garmin 76CS Plus Quick Reference Manual

76CS Plus
Quick Reference Guide
Auxiliary GPS Antenna
Connector (MCX)
Antenna
Battery
Compartment
with D-Ring
Keys
Power/Data
Cable Connector
USB Connector
256-Color TFT display
Lanyard Attachment Slot
with backlighting
190-00507-01_0A.indd 1
76CS Plus Keys
Zooms in.
Zooms out.
Cycles through the main pages in sequence and exits pages. Press
and hold to switch usage modes.
Displays the options menu for the current page. Press twice to
display the Main Menu or three times to display the Setup Menu.
Selects a highlighted option, initiates entry, and then accepts the
selected value(s). Press and hold to mark a waypoint.
Cycles through the main pages in reverse sequence, reverts to the
previous value in a data fi eld, or cancels an unintended function.
Press and hold to turn on and off the compass.
(Power key) Press and hold to turn the unit on and off. Briefl y
press and release to adjust the backlighting.
Displays the Navigation Menu window. In Powerboat and Sailboat
mode, press and hold to activate the Man OverBoard (MOB)
function.
(Rocker key) Selects menu options, enters data, and pans
the arrow on the Map page.
Land and Sea Modes
Your 76CS Plus provides four usage modes. You can use the mode that best
suits your need at the time.
Powerboat Mode
Use Powerboat mode when you are operating a boat with a motor.
Powerboat mode focuses on route navigation: you can create a route and
then navigate it later. Powerboat mode is very similar to Sailboat mode.
Sailboat Mode
Use Sailboat mode when you are operating a sailboat. It focuses on Go To
operation, meaning you can fi nd an item and go to it.
Automotive Mode
Use Automotive mode when you are driving an automobile on streets or
highways. In Automotive mode, the 76CS Plus automatically generates turn-
by-turn routes to a specifi ed location.
Off Road Mode
Use Off Road mode when you are driving an off-road vehicle, such as an
ATV or snowmobile. The 76CS Plus automatically generates a route to your
selected destination, but the route will not follow roads.
How Do I Switch Modes?
Press and hold the PAGE/MODE button. A window appears displaying the
four modes. Use the Rocker key to highlight the mode you want to use and
press ENTER.
Going to a Destination
To go to a highlighted map item:
1. Use the Rocker key to highlight the item
you would like to navigate to on the Map
page.
2. Press NAV. Go To <point name>
appears in the list of options and is
automatically highlighted. If you have
selected an area of the map that is
not a map feature, Go To MAP Point
Navigate Menu
appears. Select Go To <point name> or
Go To MAP Point and press ENTER. with Map Feature highlighted
3. Follow the magenta route created on the
Map page.
To go to a point using the Find Menu:
1. Press NAV to open the Navigate Menu.
2. Highlight Go To Point and press ENTER. The
Find Menu opens.
3. Use the Rocker key to highlight the category
you want to search and press ENTER.
4. From the results list, highlight the point you want
to go to and press ENTER.
5. Highlight Go To on the information page and
press ENTER to create a route to that point.
Find Menu
© Copyright 2005 Garmin Ltd. or its subsidiaries
190-00507-01 Rev. A Printed in Taiwan
2/9/2005 1:48:37 PM