Motorola DCT3400 Series User Manual page 17

Use the remote control or the cursor keys on the front panel to
2
navigate the on-screen menus:
•
Press the ▲ and ▼ keys to highlight the setting you wish to
change.
•
Press the ► key to select an option.
•
To exit the setting and move to another setting, press the ▲ or
▼ key.
If the User Settings menu does not display on the TV screen, the TV may
not support the default video output setting. Use the front panel LED to
adjust the settings as described in "There is no video on the TV screen"
in Section 5, "Troubleshooting."
The User Settings menu options are:
Setting
TV Type
HDMI/YPbPr
Output
Description
Sets the aspect ratio. The front panel display indicates the
type you select. Defaults to 16:9. Options are 16:9 for
widescreen TVs or 4:3 LETTERBOX or 4:3 PAN/SCAN for
standard TVs.
•
4:3 LETTERBOX fits widescreen programming on the
screen by placing black bars at the top and bottom.
•
4:3 PAN/SCAN fills the screen by cropping the left and
right edges of widescreen programming.
Sets the video display format for the HDMI or component
video outputs. The front panel display indicates the format
you select. Defaults to 1080i. Options are 1080i, 720p, 480p,
or 480i. For HDMI only, additional options you can use to
display video on a computer monitor are PC1-VGA
(640x480) and PC2-XVGA (800x600).
Some TVs only support certain display formats. Check your
TV user manual for more information.
If you are not using the HDMI connection, the HDMI/YPbPr
OUTPUT setting displays as YPbPr OUTPUT.
DCT3400 Series User Guide
11