Description And Characteristics - Axminster MCB100A User Manual

6. D e s c r i p t i o n
Characteristics
1. This 4" portable band saw is made as
light as 31kgs by weight & equipped with
an easy carrying handle for your fitness
to transport to any worksites.
2. The body of this machine is formed with
Aluminum Die Casting (Alum Casting is
optional) such that body construction of it
becomes sturdier
smoother and more acceptable.
3. During operation, the noise level of this
machine is about 80 dB which is mush
less than any of the other band saws, and
of course, it can present a comfortable
working environment.
4. This machine is made ready for the blade
tension adjustment by holding the handle
to give a little turn for the tension
increasing, or decreasing as you wish
during the period of blade replacement or
machine in operation. Also attached with
the handle, there are a couple of
compression springs set up for reducing
vibration that
workpiece popping while machine is
running. It permits the blade to be used
much longer.
5. The drive of this machine is through gear
transmission that gives steadier, stronger,
and smoother cuts superior to any of
pulley drive band saws, and make less
trouble after service. Note: if anything
A n d
and appearance
is from a defective
unusual happens
transmission system, do not try to fix or
restore it personally. Send it back to your
dealer for check-up or repairmen. Failure
to comply can result in machine damage.
6. The machine combines miter, vertical
and horizontal cutting and is designed for
full efficiency & operator convenience in
each position.
7. An auto shutoff assures the complete cut
work, thus
operation.
SHUT OFF THE POWER SOURCE
AT ALL THE TIME, BEFORE THE
MACHINE IS IN MAINTENANCE,
OPERATION,
REPAIRMENT.
WARNING
Disconnect machine from the power
source!
No matter when, where, or how. Pay
extra attention to the saw during it in
transportation,
maintenance, or adjustment.
Failure to comply may cause serious
injury!
on your gear
permitting unattended
WARNING
ADJUSTMENT, OR
operation,