Set Up Your Phone; Insert And Charge The Battery - Kyocera Hydro EDGE User Manual

Set Up Your Phone

You must first install and charge the battery to begin setting up your phone.

Insert and Charge the Battery

Follow the steps below to insert the battery and charge it.
1. Install the battery.

Slide the battery cover lock to the unlocked position.

Insert your thumbnail or fingernail into the slot and lift the battery cover gently.

Insert the battery, contacts end first, and gently press the battery into place.

Replace the battery cover, making sure all the tabs are secure and there are no gaps
around the cover.
Caution: Ensure that the battery cover lock is in the unlocked position when replacing the
cover.
Get Started 2