Kyocera Hydro EDGE User Manual page 13


Slide the battery cover lock to the locked position.
Note: When you insert the battery, your phone may power on automatically.
2. Charge your battery.

Plug the smaller end of the USB cable into the phone's charger/accessory jack.

Plug the other end of the USB cable into the charger, and then plug the charger into
an electrical outlet.
Note: Your phone's battery should have enough charge for the phone to turn on and find a
signal, set up voicemail, and make a call. You should fully charge the battery as soon as
possible.
3. Press and hold the Power button to turn the phone on.

If your phone is activated, it will turn on and search for Sprint service.

If your phone is not yet activated, see
Get Started
Activate Your Phone
3
for more information.