Kyocera Hydro EDGE User Manual page 143

Note: When you first open the alarms, two alarms are set up by default and ready for you to
customize. These alarms are turned off by default.
3. Touch an existing alarm to change the settings or touch
the alarm time.
4. Touch Time to adjust the hour and minute by scrolling each value.
5. Touch Repeat to select a repeat status for the alarm.
6. Touch Ringtone to select a ringtone that will play as an alarm.
7. Select the Vibrate check box to add a vibration feature to the alarm.
8. Touch Label to enter a name for the alarm.
9. Select the Turn alarm on check box to set the alarm on.
10. When you're finished, touch DONE. (Alarms that are set are checked in blue.)

Touch the check box next to an alarm to turn it on or off.
Delete an Alarm
1. Touch Home
2. Touch on the screen.
3. From the Alarms screen, touch a desired alarm, and then touch
4. Touch OK to confirm the deletion.
Tools and Calendar
> > Clock.
133
to add a new one and set
.