Caller Id; Call Waiting - Kyocera Hydro EDGE User Manual

● Speaker: Route the phone's audio through the speaker (
( ).
Warning: Because of higher volume levels, do not place the phone near your ear during
speakerphone use.
Touch Menu during a call to display a list of additional in-call features. Touch an option to
select it.
●
Contacts: Display your contacts list.
● Bluetooth: Route the phone's audio through a connected Bluetooth headset when
selected.

Caller ID

Caller ID identifies a caller before you answer the phone by displaying the number of the
incoming call. If you do not want your number displayed when you make a call, follow these
steps.
1. Touch Home
2. Touch
3. Enter a phone number.
4. Touch .
To permanently block your number, call Sprint Customer Service.

Call Waiting

When you're on a call, Call Waiting alerts you to incoming calls by sounding two beeps. Your
phone's screen informs you that another call is coming in and displays the caller's phone
number (if available).
To respond to an incoming call while you're on a call:
► Flick
. This puts the first caller on hold and answers the second call.
To switch back to the first caller:
► Touch Switch calls.
Note: For those calls where you don't want to be interrupted, you can temporarily disable Call
Waiting by touching
automatically reactivated once you end the call.
Phone Calls
> Phone > to display the dialpad.
.
before placing your call. Call Waiting is
45
) or through the earpiece