Reconnect A Headset Or Car Kit - Kyocera Hydro EDGE User Manual

2. If Bluetooth is not switched on, touch the off icon
3. Make sure that the headset is discoverable, so that your phone can find the headset.
Refer to the instructions that came with the headset to find out how to set it to
discoverable mode.
4. Touch SEARCH FOR DEVICES. Your phone will start to scan for Bluetooth devices
within range.
5. When you see the name of your headset displayed on the AVAILABLE DEVICES list,
touch the name. Your phone then automatically tries to pair with the headset.
6. If automatic pairing fails, enter the passcode supplied with your headset.
The pairing and connection status is displayed below the hands-free headset or car kit name in
the Bluetooth devices section. When the Bluetooth headset or car kit is connected to your
phone, the Bluetooth paired icon
headset or car kit you have connected, you can then start using the headset or car kit to listen to
music or make and receive phone calls.
Note: Due to different specifications and features of other Bluetooth-compatible devices,
display and operations may be different, and functions such as transfer or exchange
may not be possible with all Bluetooth-compatible devices.

Reconnect a Headset or Car Kit

When you have paired a headset with your phone, you should be able to reconnect it
automatically by turning on Bluetooth on your phone and then turning on the headset. However,
sometimes you will need to reconnect manually, for example if you have been using your
headset with another Bluetooth device.
1. Touch Home
2. If Bluetooth is not switched on, touch the off icon
3. Make sure that the headset is discoverable.
4. Touch the headset's name in the PAIRED DEVICES list.
5. If prompted to enter a passcode, try 0000 or 1234, or consult the headset or car kit
documentation to find the passcode.
6. If you still cannot reconnect to the headset or car kit, follow the instructions in
or Unpair from a Bluetooth
Bluetooth Headset or Car
Tools and Calendar
is displayed in the status bar. Depending on the type of
> Menu > System settings > Bluetooth.
Device, and then follow the instructions in
Kit.
to turn Bluetooth on.
to turn Bluetooth on.
139
Disconnect
Connect a