Set Up Your Phone; Charge The Battery - Kyocera DuraForce PRO 2 User Manual

NOTE: microSD cards are sold separately. Your phone supports a microSD card up
to 512 GB.
●
Camera button lets you activate the front camera, the back camera or the wide view
camera.
●
Secondary microphone suppresses background noise improving audio quality for the
other party during voice calls. In speakerphone mode, it is used as a main microphone.
●
Flash helps illuminate subjects in low-light environments when taking a picture or
recording a video. It can also work as an LED flashlight. See Flashlight.
●
Wireless charging area allows you to charge the battery using a wireless charger (sold
separately). See
●
Wide view camera lets you take pictures and videos in wide angle.
●
Back camera lets you take pictures and videos.

Set Up Your Phone

You need to charge the battery to begin setting up your phone.

Charge the Battery

Fully charge the battery before powering on the phone.
NOTE: The battery cannot be removed from the phone. For replacing or disposing the battery,
contact a KYOCERA authorized service center.
IMPORTANT: Unplug the AC adapter from the electrical outlet when not in use to reduce the
environmental impact of charging.
1. Open the cover to the USB/Charger port on the bottom of the phone.
Plug the smaller end of the USB cable into the phone's USB/Charger port.
2.
3. Plug the other end of the USB cable into the AC adapter, and then plug the adapter into
an electrical outlet. Be sure to use the AC adapter that came with your phone.
Charge the Battery Wirelessly.
4 Get Started