Call Numbers With Pauses - Kyocera Hydro EDGE User Manual

To call the 911 emergency number when the pattern screen lock, the PIN screen lock or the
password screen lock is on:
1. Touch Emergency call on the screen.
2. Touch
Once an emergency call is placed, your phone will be in Emergency mode where non-
emergency calls cannot be made.
To exit Emergency mode:
► Touch Back
Enhanced 911 (E911) Information
This phone features an embedded Global Positioning System (GPS) chip necessary for utilizing
E911 emergency location services where available.
When you place an emergency 911 call, the GPS feature of your phone seeks information to
calculate your approximate location. Depending on several variables, including availability and
access to satellite signals, it may take up to 30 seconds or more to determine and report your
approximate location.
Important: Always report your location to the 911 operator when placing an emergency call.
Some designated emergency call takers, known as Public Safety Answering
Points (PSAPs), may not be equipped to receive GPS location information from
your phone.

Call Numbers with Pauses

You can dial phone numbers with pauses for use with automated systems, such as voicemail or
credit card billing numbers.
There are two types of pauses available on your phone:
●
Add 2-sec pause: Automatically sends the next set of numbers after two seconds.
●
Add wait: Sends the next set of numbers when you touch Yes in the pop-up window.
1. Touch Home
2. Touch Menu
3. Enter additional numbers.
4. Touch the Talk key
Phone Calls
.
> Exit Emergency mode > Yes.
> Phone > to display the dialpad, and enter all or part of a number.
> Add 2-sec pause or Add wait.
to dial the number.
35