Tv Setup - Kenwood DNX7330BT Instruction Manual

Return to the Top page
Radio, Digital Radio, TV
Announcement setup
When the service for which ON is selected
starts, switches from any source to
Announcement to receive it.
1
Touch [SET] of [Announcement Select]
in the Digital Radio SETUP screen.
The Announcement Select screen appears.
2
Touch each Announcement list and set
on or off.
NOTE
• The volume setting during reception of
Announcement service is automatically stored.
The next time the Announcement service is
received, this unit recalls the volume setting
automatically.
66 66

TV Setup

You can set the TV signal receiving areas.
NOTE
• Each operation in this section can be started from
the Top Menu screen. For details, see Operating
with the Top Menu Screen (P.16).
1
Touch [ ] in the control screen.
Multi function menu appears.
2
Touch [SETUP] in the multi function
menu.
SETUP Menu screen appears.
3
Touch [Source].
Source SETUP Menu screen appears.
4
Touch [TV SETUP] in the list.
TV SETUP screen appears.
5
Set each item as follows.
TV1 Area/TV2 Area
Sets the present TV1 or TV2 receiving area.
Touch [SET], and select the area and number.
This function is available only when
KTC-V500N/PV300/N/P optional accessory is
connected.
On Screen TV
Sets how to display the information of the TV.
Auto (Default): I nformation appears for 5
seconds when updated.
OFF: D oes not display any information.
Return to the Top page
Radio, Digital Radio, TV
67