Memory Operation; Selecting Operation - Kenwood DNX7330BT Instruction Manual

Return to the Top page
Radio, Digital Radio, TV

Memory Operation

Auto memory
You can store stations with good reception in
memory automatically.
This function is for tuner and TV only.
NOTE
• Auto memory terminates when 6 stations are
stored or when all stations are tuned in.
• The operation ends automatically if you do not
operate within 10 seconds.
Tuner
1
Touch [ ].
Sub function menu appears.
2
Touch desired band key.
3
Touch [ ] in the control screen.
The multi function menu appears.
4
Touch [AME] in the multi function
menu.
5
Touch [1] or [¡] in the sub function
menu.
Auto memory starts.
60 60
TV (For models with region code 2 or 3)
1
Touch illustrated area during playback
to switch the band you want to store in
memory.
2
Touch illustrated area.
Simple Control screen appears.
3
Touch [ ] in the control screen.
The multi function menu appears.
4
Touch [AME] in the multi function
menu.
5
Touch [4] or [¢] in the function
menu.
Auto memory starts.
Manual memory
You can store the current receiving station or
channel in memory.
1
Select a station or channel you wish to
store in memory.
NOTE
• For TV, touch center bottom area of the screen if
source control screen is not displayed.
2
Touch [P#] (#:1-6, 1-15) in which you
want to store the station or channel for
2 seconds until a beep sounds.
Return to the Top page
Radio, Digital Radio, TV

Selecting Operation

Preset select
You can list and select memorized station,
ensemble, or channel.
Selecting from the multi function menu
1
Touch the desired number from P1 to
P6/ P15.
The unit will tune to the selected station or
channel.
Selecting from the preset list (Tuner
and TV only)
1
Touch illustrated area.
List Control screen appears.
2
Select a station or channel from the list.
NOTE
• Touching [ ] and then [Preset List] displays
the preset channel list. You can also select your
desired channel from the list.
61