Kenwood DNX7330BT Instruction Manual page 43

Return to the Top page
Setting Up
Travel Prayer for Safe Drive Setting
(DNX7330BTM/ DNX5330BTM only)
When this function is set, the prayer for
driving safety is displayed when the unit is
turned on, then Quran is played.
1
Touch [SET] of [Travel Prayer for Safe
Drive] in the User Interface screen.
Travel Prayer for Safe Drive Setting screen
appears.
2
Set each item as follows.
Travel Prayer for Safe Drive
Turns the Safe drive pray function on or off.
Sound Volume
Sets the sound volume of Quran.
84 84
Touch panel adjustment
1
Touch [Touch] in the System Menu
screen.
Touch Panel Adjustment screen appears.
2
Follow the instruction on the screen
and touch the center of each .
NOTE
• To cancel the touch panel adjustment, touch
[Cancel].
• To reset to the initial status, touch [Reset].
Security setup
You can set up a security code to protect
your receiver system against theft.
NOTE
• When the Security Code function is activated, the
code cannot be changed and the function cannot
be released. Note the Security Code can be set as
the 4 digit number of your choice.
1
Touch [Security] in the System Menu
screen.
Security screen appears.
2
Touch [ON] of [SI].
NOTE
• If "SI" is turned on, the SI indicator on the sub
panel flashes when the vehicle ignition is off and
the panel is detached ( ). Default is "ON".
3
Touch [SET] of [Security Code Set].
NOTE
• If you have already completed the code
registration, [CLR] is displayed.
4
Enter a security code with four-digit
number and touch [Enter].
5
Enter the same code again and touch
[Enter].
Security code is registered.
Return to the Top page
Setting Up
NOTE
• If you enter a different security code, the screen
returns to step 4 (for the first code entry).
• If you have pressed <Reset> button or if you
have disconnected the Receiver from battery,
enter the correct security code as that you have
entered in step 4 and touch [Enter]. You can use
your receiver.
85