Setting The Timers; Changing The Time - Garmin West Marine 276C Plus Owner's Manual

C Y 276C P
USTOMIZING OUR LUS

Setting the Timers

To open the Timers tab, press MENU twice, select Setup from the
vertical tab list, and Timers from the row of tabs along the top.
Setup Timers Tab
User—allows you to set the timer to Count Up or Count Down.
You can also Reset the timer and turn it Off. To the right of this
field, enter a time to use when counting up or down.
Marine—displayed on the Compass page. See page 47.
Since Midnight—the time the unit has been turned on since
midnight. This will reset if you restore All Unit Defaults from the
System tab. See page 87.
86
190-00501-00_0A.indd 86
> S S
ETTING UP THE YSTEM

Changing the Time

The Time tab allows you to set the time format and zone. You can
also set the unit to conform to Daylight Saving Time. The current
time and date are displayed at the bottom of the page.
To open the Time tab, press MENU twice, select Setup from the
vertical tab list, and Time from the row of tabs along the top.
Setup Time Tab
Time Zone—allows you to choose a city in your correct time zone
so the 276C Plus shows the correct local time. Select Other to enter
a UTC Offset.
If the incorrect date is displayed, press MENU, highlight Set Date,
and press ENTER. You will then be prompted to enter the current
year. The 276C Plus will use this information when gathering
satellite data to display the correct date.
276C Plus Owner's Manual
1/13/2005 10:43:57 AM