Garmin West Marine 276C Plus Owner's Manual page 21

Now we will simulate navigation in the Automotive mode. To switch
to Automotive mode, press and hold the PAGE key. Use the Rocker
key to select Automotive and press ENTER.
To find and go to a land destination:
1. Be sure the 276C Plus is set to Simulator mode.
2. Press the FIND key. Highlight Cities and press ENTER.
3. Use the Rocker key to select a nearby city and press
ENTER. For our example, we selected National City, CA.
4. With Go To highlighted, press ENTER.
5. Highlight Faster Time or Shorter Distance and press ENTER.
6. At the "Do you want to simulate driving this route?" pop-up
window, select Yes and press ENTER.
The Map page opens showing a magenta turn-by-turn route
from your current location to your destination.
Simulated navigation displayed on the Map Page (Automotive mode)
276C Plus Owner's Manual
190-00501-00_0A.indd 13
G S
ETTING TARTED
7. Observe the movement of the position marker (triangle) as
the unit simulates navigation. If desired, press IN or OUT to
zoom.
8. If desired, press PAGE or QUIT to view the simulated
navigation on the other main pages.
Simulated Current Route Page (Automotive mode)
When you are ready to navigate on your own, turn the Simulator off.
TIP: You can activate and deactivate the Simulator through the
GPS page options menu or the Setup tab of the Main Menu.
> S B N
IMULATED ASIC AVIGATION
13
1/13/2005 10:43:27 AM