Proximity Points - Garmin West Marine 276C Plus Owner's Manual

B O > C
ASIC PERATION REATING AND
To delete waypoints by distance:
1. From the User Points tab, highlight the waypoint to be
deleted and press MENU.
2. Highlight Delete By Distance and press ENTER.
3. Select Less Than or More Than and enter the desired
distance using the Rocker key.
4. If desired, you can select a waypoint or point of interest
as the From location. Highlight the From field and press
ENTER. From the Find Menu, select the desired location and
press ENTER. When OK is highlighted, press ENTER.
5. Highlight Delete and press ENTER to delete all waypoints
within the set location. Choose Cancel or press QUIT to exit
without deleting the waypoints.
30
190-00501-00_0A.indd 30
U W
SING AYPOINTS

Proximity Points

You can define an alarm circle around a stored waypoint position.
The alarm circle can help you avoid reefs, rocks, or restricted
waters. You can add proximity alarms to up to ten waypoints.
Press MENU twice to open the Main Menu. Use the Rocker key to
highlight Points from the vertical list. Then press the Rocker key to
the right to highlight the Proximity tab.
Proximity Points Tab
If a proximity alarm circle overlaps an existing alarm circle, a
"Proximity Overlaps Another Proximity Waypoint" message
appears. Because the unit only alerts for one of the overlap points,
use caution when navigating in these areas. If you enter an alarm
circle overlap, you are only alerted to the closest proximity
waypoint.
276C Plus Owner's Manual
1/13/2005 10:43:34 AM