Changing The Page Sequence; Some Tips About The Page Sequence - Garmin West Marine 276C Plus Owner's Manual

C Y 276C P
USTOMIZING OUR LUS

Changing the Page Sequence

The Page Sequence tab in the Main Menu allows you to reorder any
of the pages displayed in the page sequence. Press PAGE or QUIT
to scroll through the page sequence.
You can also add pages to the page sequence from this tab. If you
add a page from the Main Menu to the page sequence, that page no
longer appears in the Main Menu.
Page Sequence Tab
To change the page sequence:
1. Press MENU twice to open the Main Menu. Use the Rocker
key to select Display from the vertical row of tabs.
2. Press the Rocker key to the Right to select Page Sequence.
82
190-00501-00_0A.indd 82
> S S
ETTING UP THE YSTEM
Highlight a
blank line and
press ENTER
to add a page
to the sequence
3. To move a page in the order, highlight the page and press
MENU. Then select Move and press ENTER. Press
the Rocker key Up or Down until the desired position is
displayed and press ENTER.
4. To insert a new page in the order, press MENU, select Insert,
and press ENTER. From the list, select the page you want to
add and press ENTER.
5. To remove a page from the page sequence, highlight the
page you want to remove and press MENU. Select Remove
and press ENTER.
6. Highlight Clear All and press ENTER to remove all pages
but the Map page from the sequence.
7. Highlight Include All and press ENTER to include all pages
in the sequence.

Some Tips about the Page Sequence

• Adjusting the Page Sequence is mode-specific. For example,
if you are in Powerboat mode and you add the Tide page
to the sequence, the Tide page will not be added to the
Automotive mode sequence. This gives you complete control
in setting up your 276C Plus for each mode.
• If you are using a Sonar Module, such as a Garmin GSD 20,
you should add the Sonar page to the sequence.
276C Plus Owner's Manual
1/13/2005 10:43:55 AM