Enabling Map Data - Garmin West Marine 276C Plus Owner's Manual

C Y 276C P
USTOMIZING OUR LUS

Enabling Map Data

You can view the data that is currently loaded on your 276C Plus
unit and data card.
Map Family
highlighted.
Press ENTER
to view the
individual maps
in the family.
Map Information Page
To enable map families:
1. Access the Map page and press MENU.
2. From the options menu, highlight Map Information and
press ENTER. The first page shows the Map Families stored
on the data card and unit and whether they are shown on the
Map page.
3. To enable a Map Family, highlight the check box and press
ENTER to place a check mark in the box.
4. Press QUIT to exit.
80
190-00501-00_0A.indd 80
> S S
ETTING UP THE YSTEM
Individual Map Information Page
Showing the individual maps that are in the selected Map Family
To enable individual maps:
1. From the Map Information page, highlight a Map Family and
press ENTER.
2. To enable a map, highlight the box next to the name, and
press ENTER to place a check mark in the box.
3. To show or hide all maps, press MENU, select one of the
options (Show All, Hide All, or Show Defaults), and press
ENTER.
4. Press QUIT to exit.
To view detailed information about an individual map, highlight the
map name in the list and press ENTER.
276C Plus Owner's Manual
1/13/2005 10:43:55 AM