Averaging the Waypoint's Location
Averaging a waypoint's location makes the unit take several sample
location measurements for a waypoint to calculate a more accurate
position reading.
To calculate the average location:
1. Open the Waypoint page and press MENU to open the
options menu.
2. Select Average Location from the menu and press ENTER.
Average Location Page
3. The Average Location window appears. Watch the fields
change as the unit calculates the average position of the
waypoint. Press ENTER to save the position.
NOTE: You must have a GPS satellite fix before you can average
a waypoint's location.
276C Plus Owner's Manual
190-00501-00_0A.indd 27
B
O
ASIC
PERATION
Organizing Waypoints into Categories
You can organize your waypoints into categories to help you manage
and use your waypoints. For example, you can create a "Vacation"
category that stores all of the waypoints you will use for your
upcoming vacation. When the vacation is over, you can simply
delete all the waypoints in that category by pushing a few buttons.
You can create up to 15 waypoint categories.
To create a waypoint category:
1. From any of the waypoint pages or the Points Tab, press
MENU to open the options menu.
2. Select Edit Categories and press ENTER.
3. Use the Rocker key to highlight Add and press ENTER.
Enter the name of the category, select Save, and press ENTER.
4. Use the Rocker key to enter a name for the category.
5. Highlight Save and press ENTER.
>
C
U
W
REATING AND
SING
AYPOINTS
27
1/13/2005 10:43:32 AM