DIVAR IP 7000 (3U)
Observe the safety notes in this chapter.
Safety message explanation
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate
Indicates a situation which, if not avoided, could result in damage to the equipment or
environment, or data loss.
Follow these rules to ensure general safety:
Installation should only be performed by qualified service personnel in accordance with
applicable local codes.
The Low Voltage power supply unit must comply with EN/UL 60950. The power supply must
be a SELV-LPS unit or a SELV - Class 2 unit (Safety Extra Low Voltage - Limited Power
Bosch Sicherheitssysteme GmbH
Keep the area around the system clean and free of clutter.
Place the chassis top cover and any system components that have been removed away
from the system on a table so that they won't accidentally be stepped on.
While working on the system, do not wear loose clothing such as neckties and
unbuttoned shirt sleeves, which can come into contact with electrical circuits or be
pulled into a cooling fan.
Remove any jewelry or metal objects from your body, which are excellent metal
conductors that can create short circuits and harm you if they come into contact with
printed circuit boards or areas where power is present.
After accessing the inside of the system, close the system back up and secure it to the
rack unit after ensuring that all connections have been made.
The system is heavy when fully loaded. When lifting the system, two people at either end
should lift slowly with their feet spread out to distribute the weight. Always keep your
back straight and lift with your legs.
Safety information | en
2016.08 | V2.1 | DOC