Disk Diagnostic Page - D-Link ShareCenter Pulse DNS-320 User Manual

D-Link ShareCenter Pulse User Manual
S.M.A.R.T stands for "Self-Monitoring, Analysis, and Reporting Technology". This is
a system on a hard drive used to monitor and report on the health of the drive. If the
HDD is grayed out, then it does not support S.M.A.R.T.
Scan Disk:
Scan Disk will scan your system's file system for errors
and/or corruption. After completion, any errors on your
file system will be displayed accordingly.
S.M.A.R.T Test:
To run the S.M.A.R.T test, select the hard drive you wish
to perform the S.M.A.R.T test on. Then select whether
to run a Quick or Extended S.M.A.R.T test. Then press
"Start" to run the test.
Quick Test:
Runs a quick S.M.A.R.T test. The test usually takes
less than 10 minutes. This test will check the electrical,
mechanical, and read performance
of the hard drive. The results are displayed as Passed/
Failed on the web UI and can also be sent as an e-mail
alert.
Extended Test:
Runs an extended S.M.A.R.T test. This test requires a lot
more time to complete. However, it is a more thorough
and complete test when compared to the Quick Test.
Send result by E-mail:
Enable this function in order to have the results of the S.M.A.R.T test sent to you by e-mail.
Create Schedule: Click on this button in order to create a scheduled S.M.A.R.T test. You will be able to schedule a test on a daily, weekly, and monthly basis.

Disk Diagnostic Page

Page 72