Power Management Page - D-Link ShareCenter Pulse DNS-320 User Manual

D-Link ShareCenter Pulse User Manual
The ShareCenter Pulse Power Management feature allows you to configure the drives
to shut down while power remains constant to the device. The drives will power up
again when data is accessed.
HDD Hibernation:
Enable or Disable HDD Hibernation settings.
Turn Off Hard Drives:
Set the amount of idle time before the drives will go into
hibernation.
Power Recovery:
Enable or disable Power Recovery. The Power Recovery
feature will automatically restart your device from a
previously unexpected shutdown due to a power failure.
Fan Control Type:
The speed of the fan can be controlled from this section.
If using "Auto" mode, the speed of the fan will change
(Off/Low/High) depending on the internal temperature of
the enclosure.
Power Off
Here the user can configure the power off schedule.
Scheduling:
Enable of disable the power off schedule and configure
the routine (Daily, Weekly or Monthly) and set the time.

Power Management Page

Page 64