Software Setup; Easy Search Utility - D-Link ShareCenter Pulse DNS-320 User Manual

D-Link ShareCenter Pulse User Manual
When first powered on, during the initial boot sequence, the ShareCenter Pulse will wait to be assigned an IP address via DHCP. It is recommended that you use the included
D-Link Easy Search Utility when accessing and configuring the ShareCenter Pulse for the first time. If you want to change the IP address before logging in, or if you are
unable to connect to the ShareCenter Pulse IP address, you can use the Easy Search Utility provided on the product CD to locate the device on your network and make any
needed changes.
Network Storage Device:
Refresh:
Configuration:
LAN:
Apply:
Drive Mapping:
Available Drive Letters:
Exit:

Software Setup

Easy Search Utility

The Easy Search Utility displays the available
ShareCenter Pulse devices on the network.
Refreshes the device list.
Click Configuration to access the Web-based
configuration utility of the ShareCenter Pulse.
Configure the LAN Settings for the ShareCenter
Pulse here.
Click Apply to save changes to the LAN Settings.
Volumes available for mapping are displayed
here.
Choose an available drive letter. Click Connect
to map the selected volume. Click Disconnect to
disconnect the selected mapped volume.
Click Exit to close the utility.
Page 11