Connecting A Bar Code Reader (It-3100M53E/It-3100M54E Only; Connecting The Bar Code Reader - Casio IT-3100 User Manual

Connecting a Bar Code Reader
(IT-3100M53E/IT-3100M54E only)
Connect a bar code reader to the RS-232C interface connector (8-Pin) on the Handheld
Printer Terminal.

Connecting the bar code reader

1. Check that the power is off. If the power is on, always make sure to turn it off by
pressing the power key. Open the cover of the RS-232C interface connector. (
2. Insert the plug of the bar code reader
into the connector as shown in the
illustration.(
Disconnecting bar code reader
Turn off the power of the Handheld Printer Terminal. Unplug the bar code reader.
E-68
)
2
)
1
1
2