Using The Bar Reader; Performing A Bar Code Operation - Casio DT-930M50E User Manual

Using the Bar Code Reader
Performing a Bar Code Read Operation
1
press the trigger key.
2
code. The read indicator lights green when
the read is successful.
Important!
· If the bar code is wider than the width of the Handheld Terminal's reader
· The Handheld Terminal should be able to read a bar code from the
EXPLANATORY LABEL
E-28
the label and Handheld Terminal or move closer and then try again.
port, try moving the Handheld Terminal a bit farther away from the bar
code.
maximum distance of 45 centimeters on the forward-facing reader port
model and about 40 centimeters on the down-facing reader port model
under the following conditions.
Ambient Light: 500~900 lux (fluorescent)
PCS: 0.9 min.
Minimum Bar Width: 1.0 mm CODE-39
ITF (extended version)
· Wavelength: 650 nm
Maximum output: 1.0 mW
· CAUTION
may result in hazardous radiation exposure.
Trigger key
Power key
Maximum distance:
Approx. 45 cm
(forward-facing
reader port model)
and approx. 40 cm
(down-facing reader
port model)