Westinghouse POR663 Owner's Manual page 16

Re-assembling top door trim
• T ake hold of the top door trim at each side and position it
to the inside edge of the glass�
• P ush the trim down with its top edge over glass panel until
the clip snaps in on each side of the trim�
• P ush the middle of the trim down to ensure it is straight
and firm against the glass panel�
fitting the oven door
• T ake hold of the oven door with a hand on each side and
with the door at an angle of 45º, position the recesses at
the bottom of the door onto the hinge arms of the oven�
Let the door slide down the hinge arms as far as it will go�
CATALYIC LINERS
30
• O pen the door fully to access the hinges then rotate
the 'stirrups' (highlighted in the image) on both hinges
back to their original positions� The oven door may now
be closed�
Removing side open door top trim
• T ake hold of the grid embossed sections of the door trim
at each end and press inwards to release the clips� Then
remove the door trim by lifting it upwards�
Removing side open door glass panel
warning
Rough handling, especially around the edges can cause the
glass to break�
• T ake hold of the black bordered glass panel with a hand
on its upper and lower edge� Lift and rotate the glass
around the retainer to remove it from the guide�
• T ake hold of the smaller clear glass panel (when fitted)
with a hand on its upper and lower edge� Lift the glass to
remove it from the retainer�
• T he rubber mouldings on the upper corners of the smaller
clear glass panel may be removed� Don't misplace them�
Cleaning door glass panels
warning
Do not to use harsh abrasives on the glass panes as the
reflective surface plays a role in the function of the oven.
Do not place glass in dishwasher� Hand wash only with a
soft cloth and warm soapy water� When dry polish with a
soft cloth and ensure the glass is dry before reassembly�
Re-assembling door glass panels
• E nsure the rubber mouldings are on the upper corners of
the smaller clear glass panel�
• I nsert the smaller glass panel (when fitted) first from above
and at an angle to the profile of the door�
• R epeat for the black bordered glass panel ensuring the
painted surface is facing toward the door�
Replacing top door trim
• T ake hold of the top door trim at each side and position it
to the inside edge of the glass�
• P ush the trim down with its top edge over glass panel until
the clip snaps in on each side of the trim�
31
CATALYIC LINERS