Installation; Cabinet Construction - Westinghouse POR663 Owner's Manual

cabinet construction for your
appliance
For the best integration within a kitchen, install this appliance
in a standard 600mm wide cupboard that gives a flush fit
with the surrounding cupboard fronts (figure A)�
A recess of 20 mm is ideal. It can also be installed using a
proud fit with the surrounding cupboard (figure B)�
NoTe: Your appliance must be mounted on a flat surface for
the full width and depth of the product.
Infill panel
20mm
600mm
Cupboard
door
Figure A - Flush fit (top view)
565mm
cleat
Cupboard front
rd
Figure B - Proud fit (top view)

INSTALLATION

34
oven dimensions
oven height (A)
Underbench oven 595mm
Separate grill underbench oven 725mm
Separate grill walloven 888mm
Duo oven 888mm
Double oven 1083mm
All built-in ovens are 595mm wide
553mm
15mm
565mm
16mm cleat
Cupboard front
Cupboard
door
A
Figure B - Proud fit (top view)
underbench ovens
Your underbench oven looks best when the control panel is directly under the benchtop� An upper infill panel may have to be
added if the cooktop placed above the benchtop is too deep�
Refer to cooktop installation instructions for required clearance between cooktop and oven�
8mm min.
clearance
NoTe: If a powerpoint is fitted it must be
accessible with the appliance installed.
separate grill wall oven & duo oven
INSTALLATION
35