Threading The Upper Thread - Husqvarna Viking Sapphire 870 QUILT User Manual

D
E

Threading the upper thread

Make sure the presser foot is raised and the needle is in the up
position
Turn off the main switch
1. Place the thread on the spool pin and the spool cap on the
spool pin as described on page 11.
2. Spool pin in horizontal position:
Bring the thread over and behind the pre-tension thread guide
(A) and under the thread guide (B).
pool pin in vertical position:
S
Instead of bringing the thread into the pre-tension guide
(A), bring it directly under the thread guide (B).
3. Bring the thread down between the thread tension discs (C).
12
Getting ready to sew
A
B
C
4. Continue threading in the direction indicated by the arrows.
Bring the thread from the right into the slot on the take-up
lever (D).
5. Take the thread down and behind the last guide just above the
needle (E).