Image Stabilization (500I Series Only); Pre-Position Tour - Bosch VG4-200 User Manual

VG4 AutoDome Modular Camera System
7.6

Image Stabilization (500i Series Only)

Image Stabilization becomes increasingly important as zoom ranges are extended. The
advanced image stabilization algorithms of the 500i Series eliminate camera shake for
exceptional image clarity. Bosch achieves this clarity without reducing camera sensitivity or
picture quality.
–
–
7.7

Pre-position Tour

The 200 Series AutoDome features one (1) standard preset tour, while the 300 and 500i
Series AutoDomes feature two (2) preset tours. Each preset scene is saved for playback later.
Tour 1 is a standard tour that only recalls the scenes in the exact sequence they were shot.
Scenes can be added or deleted on the tour, but the sequence cannot be changed. To add or
remove scenes on Tour 1 enter the keyboard command SHOT-900-ENTER and follow the on-
screen instructions.
Tour 2 (300 and 500i Series only) is a customizable tour that allows you to rearrange the
sequence of scenes on the tour by inserting and deleting scenes. To enter the Edit Tour 2
menu, enter the keyboard command SET-900-ENTER and follow the on-screen instructions.
Bosch Security Systems, Inc.
To configure image stabilization, open the Main menu, select the Advanced menu, and
then select Stabilization to turn on the feature.
In Pelco Mode open the Main menu, select the Advanced menu, and then select
Stabilization to turn on the feature.
User's Manual
Advanced Features | en
F.01U.133.267 | 6.0 (IP4) | 2009.06
51