Bosch VG4-200 User Manual page 32

28 en | Alternative Control Protocols
Setting the FastAddress with an AD Manchester or AD Sensormatic RS-422 Keyboard
1.
2.
3.
4.
5.
–
–
F.01U.133.267 | 6.0 (IP4) | 2009.06
Enter the AutoDome Setup menu using 66-Preset/Shot on most AD/Sensormatic RS-422
keyboards. Note: Based on your keyboard model, it may be necessary to enter the
PROGRAMMING mode prior to entering this command.
Move the joystick to highlight the Command Lock menu. Note: Upon the first time the
VG4 is set-up out of the box, the Command Lock feature is set to OFF for the first two (2)
minutes of operation and then reverts to the ON setting.
Setup Menu
Exit...
Command Lock: OFF
Bosch Menu
Camera Setup
PTZ Setup
Edit Password
*FastAddress: Not Set
Software Version
Ack and Reset Alarms
Restore All Settings
* = Factory Setting
Focus / Iris: Select
Press the FOCUS or the IRIS button to turn Command Lock to OFF.
Move to the FastAddress menu and press the FOCUS or the IRIS button to open the
menu.
Use the joystick to re-enter the 6-digit factory set Unique Identifier displayed for the VG4
AutoDome. See example as follows:
Enter FastAddress
FastAddress:
Unique Identifier:
000000
r
Continue...
Exit...
Joystick: Match Identifier
Move the joystick up or down to select the individual number.
Move the joystick right to move to the next number position.
User's Manual
Not Set
200668
VG4 AutoDome Modular Camera System
Bosch Security Systems, Inc.