Connecting To A Tv With No Hdmi Input - Pioneer LX01BD Operating Instructions Manual

Connecting to a TV with no HDMI input

Direction of
signal flow
Caution
• When connected to the TV using a component video cable
(commercially available), video signals are not output with a
resolution of 1080/50i, 1080/50p, 720/50p, 1080/24p or 1080/60p.
• Depending on the output video resolution setting, the picture
may not be output (page 65).
• Video signals are output with a resolution of 576/50i or 480/60i
when connected using a video cable (commercially available) or
an S-Video cable (commercially available).
• Connect the player's video output directly to your TV.
This player supports analog copy protection technology.
Therefore the picture may not be displayed properly if connected
to a TV via a DVD recorder/video deck or when playing the
player's output material that is recorded by a DVD recorder/
To component video input
To audio input
terminals
FRONT SURROUND SURROUND BACK CENTER
L
R L
R
AUDIO OUT ( 2 ch ) AUDIO OUT ( 7.1 ch ) SUB WOOFER
OPTICAL
CONTROL DIGITAL
IN OUT
HDMI
OUT IN 3 IN 2
SYSTEM
TV
To video input
terminals terminal
VIDEO OUT
Y
VIDEO
P
B
HDMI OUT
P R
COMPONENT
S-VIDEO
VIDEO
Player's rear panel
HDMI cable
(included)
IN 1
Receiver subwoofer's rear panel
video deck. Furthermore, the picture may not be displayed
properly due to the copy protection when the player is connected
to a TV with a built-in video deck. For details, contact the
manufacturer of your TV.
To S-Video input
terminal
AC IN
06
93
En