Playback; Playing Discs Or Files - Pioneer LX01BD Operating Instructions Manual

Chapter 3

Playback

Important
• Press BD (HDMI 1) to set the remote control to BD control mode
in order to operate the Blu-ray disc player.
HDMI 1 HDMI 1 HDMI 2
BD BD DVR
INPUT 
SELECT
• The BD settings are listed on two separate pages. To cycle
between pages, use the PAGE button.

Playing discs or files

This section describes the player's main operations.
For the types of discs that can be played, see Playable discs on
page 58. For the types of files that can be played, see Playable files
on page 60. Movie and music files recorded on discs are played with
Home Media Gallery (page 75).
1 Press SYSTEM ON to turn on the power.
Turn the TV's power on and switch its input beforehand.
ON ON
INPUT
HDMI 1 HDMI 2
BD DVR
2 Press OPEN/CLOSE (LCD page 1) to open the disc tray and
load the disc.
BD 1/2 BD 1/2
2nd 2nd
AUDIO AUDIO
Note
• Load the disc with the printed side facing up.
• Several dozen seconds are required to read the disc.
Once reading is completed, the type of disc is
displayed on the player's front panel display.
HDMI 3
DVD TV

FM / AM
BD 1/2 BD 1/2
SYSTEM SYSTEM OFF
TV

HDMI 3
DVD TV
2nd
OPEN/
VIDEO CLOSE
Press  (play) to play the disc.
3
BD 1/2 BD 1/2

To pause, press  (pause) during playback.
To stop, press  (stop) during playback.
Note
• Some discs start playing automatically when the disc tray is
closed.
• DVD-Video discs have parental lock features. Input the
password registered in the player's settings to unlock the
parental lock. For details, see page 87.
• For some BD-R/-RE, playback protection is set for the disc or titles.
Input the code number set for the disc to unlock the protection.
 If the disc menu is displayed
For some discs, the disc menu is displayed automatically when
playback starts. The contents of the disc menu and the way to
operate differ from disc to disc.
 Resuming playback from where it was
stopped (resume playback function)
• When  (stop) is pressed during playback, the point at which
the disc stopped is stored in the memory. When  (play) is
pressed, playback resumes from that point.
• For CDs and music files, playback starts from the beginning of
the track/file that was playing.
• To cancel the resume playback function, press  (stop) while
playback is stopped.
Note
• The resume playback function is canceled automatically in the
following cases:
– When the disc tray is opened.
– When the file list window is switched.
– When the power is turned off. (For BDs and DVDs this does
not cancel the resume playback function.)
• The resume playback function cannot be used for some discs.
 

03
67
En