Changing The Terminals For Outputting Video And Audio Signals (Output Terminal Priority); Restoring All The Settings To The Factory Default Settings - Pioneer LX01BD Operating Instructions Manual

4 Change the country/area code.
Use / to change, then press ENTER to set.
Initial Setup
BD PLAYER
Video Out Country Code
Audio Out
Code
Speakers
HDMI
Number
Language
Parental Lock
Options
Setup Navigator
 To change the country/area code using
numbers
Use / to select Number.
1
2 Use the number buttons (0 to 9) (LCD page 2) to input the
number, then press ENTER.
Changing the terminals for
outputting video and audio signals
(Output Terminal Priority)
Set the video and audio terminals to be used.
1 Select and set Options.
Use / to select, then press ENTER.
TOP MENU
DISC
NAVIGATOR
HOME
MENU
SETUP
Initial Setup
BD PLAYER
Video Out Output Terminal Priority
Audio Out On Screen Display
Speakers Angle/Secondary Indicator
HDMI Hybrid Disc Playback
Language BDMV/BDAV Playback Priority
Parental Lock DivX VOD
Options Auto Power Off
Setup Navigator
Select and set Output Terminal Priority  Next Screen.
2
Use / to select, then press ENTER.
3 Select the terminal for outputting video signals.
Use / to select, then press .
When a digital output is selected for the video output terminal,
Video is fixed at HDMI and cannot be changed.
TOOLS
MENU
RETURN
On
On
BD
BDAV
On
When an analog output is selected for the video output terminal,
Component Video or S-Video/Video can be selected for Video.
TOP MENU
DISC
NAVIGATOR
HOME
MENU
SETUP
Initial Setup
BD PLAYER
Video Out Output Terminal Priority
Audio Out
Video
Speakers
HDMI
Audio
Language
Parental Lock
Options
Setup Navigator
• HDMI – HDMI OUT terminal
• Component Video – COMPONENT VIDEO output terminals
• S-Video/Video – S-VIDEO output terminal or VIDEO output
terminal
The video and audio signals output from the set output terminals are
output synchronously (lip synchronization).
Caution
• If the output terminal you want to select at Video is not
displayed, use the VIDEO SELECT button to switch between
digital and analog output (page 65).
4 Select the terminal for outputting audio signals.
Use / to select, then press ENTER.
• HDMI – HDMI OUT terminal
• Digital Audio – DIGITAL OUT (OPTICAL) terminal
• Analog Audio – AUDIO OUT (2 ch) terminals or AUDIO OUT
(7.1 ch) terminals
The optimum audio signals for the audio format and the player's
settings are output from the output terminal(s) set here.
Caution
• Linear PCM (2-channel) audio signals are output from the audio
terminals other than the one set at Audio, regardless of the
audio format and the player's settings.
Restoring all the settings to the
factory default settings
1 Check that the player's power is turned on.
When a disc is playing, press  STOP to stop playback.
2
Eject the disc from the player.
While pressing  STOP, press  STANDBY/ON.
3
Operate using the buttons on the player's front panel.
Note
• After restoring all the settings to the factory default settings, use
Setup Navigator to reset the player (page 62).
TOOLS
MENU
RETURN
S-Video/Video
Analog Audio
05
89
En