Connecting Your Component With No Hdmi Terminal - Pioneer HTP-072 Operating Instructions Manual

Connecting your equipment

Connecting your component with no HDMI terminal

This diagram shows connections of a TV and DVD player (or other playback component) with
no HDMI terminal to the receiver.
Note
• In order to listen to the audio from the TV that is connected to this receiver using a analog
audio cables, set-up for analog audio input is required (see The Input Assign menu on
page 32).
• You can only connect one component to the optical input terminal. If connecting other
devices, please use a different method to connect the audio.
In order to listen to the audio from the source component that is connected to this receiver
using an optical cable, first, switch to the DVD (DVD player) or SAT/CBL (set-top box), then
press SIGNAL SEL to choose the audio signal O1 (OPTICAL1) (see Selecting the audio input
signal on page 20).
• You can only connect one component to the coaxial input terminal. If connecting other
devices, please use a different method to connect the audio. In order to listen to the audio
from the source component that is connected to this receiver using a coaxial cable, first,
switch to the DVD (DVD player) or SAT/CBL (set-top box), then press SIGNAL SEL to
choose the audio signal C1 (COAXIAL1) (see Selecting the audio input signal on page 20).
In order to listen to the audio from the DVD player that is connected to this receiver using
a coaxial cable, first, switch to the DVD input, then press SIGNAL SEL to choose the audio
signal C1 (COAXIAL1) (see Selecting the audio input signal on page 20).
DVD player
VIDEO OUT
Select one
ANALOG AUDIO OUT DIGITAL AUDIO OUT
OPTICAL COAXIAL
R L
HDMI
DVD
ANTENNA
FM UNBAL
75
VIDEO IN
Set-top box
VIDEO OUT
Select one
ANALOG AUDIO OUT DIGITAL AUDIO OUT
OPTICAL COAXIAL
R L
IN IN OUT
IN 1 IN 1
SAT/CBL GAME BD
CD TV
ASSIGNABLE ( ) ( ) ASSIGNABLE
COAXIAL OPTICAL
VIDEO AUDIO A
SPEAKERS
R L
FRONT CENTER
AM LOOP
R L
DVD IN
SAT/CBL
IN
ANALOG IN
1
(CD)
ASSIGNABLE
MONITOR
OUT
R L OPTICAL
ANALOG AUDIO OUT DIGITAL AUDIO OUT
Select one
TV
This connection is
required in order to
listen to the sound of
the TV over the
receiver.
02
02
SURROUND
R L
15
En