Pioneer LX01BD Operating Instructions Manual page 15

Note
• When digital connections are used, it may be necessary to
adjust the digital audio output settings on the TV. For details,
consult the operating instructions for your TV.
• About the different types of Blu-ray disc players:
– Use the AUDIO OUT (2 ch) and AUDIO OUT (7.1 ch) terminals
to connect a separately sold receiver and listen to 2-channel or
7.1-channel sound, respectively.
– Use the VIDEO OUT terminals to connect to a TV not
equipped with an HDMI terminal.
8 Connect the power cord.
• Connect each power cord to the AC inlet on the Blu-ray disc
player and the receiver subwoofer. Connect each power cord to
a wall socket in the following order:
1. Blu-ray disc player
2. Receiver subwoofer
3. TV
To AC outlet
To AC outlet
• Run the cords that are connected to the side panel of the
receiver subwoofer over the back side of the unit, and replace
the cover on the side panel.
Note
• Do not use any power cord other than the one supplied with this
system.
• Do not use the supplied power cord for any purpose other than
connecting to this system.
• After connecting this unit to an AC outlet, a 15-second
initialization process begins. You cannot carry out any
operations during initialization. The HDMI indicator on the
display unit blinks during initialization, and you can turn this
unit on once it has stopped blinking.
AC IN
Blu-ray disc player
Receiver subwoofer
02
15
En