Adjusting The Input Signal Monitoring Mix - Zoom H6 Handy Recorder Operation Manual

Adjusting the input signal monitoring mix

You can adjust the level and panning of each input signal for the monitoring mix.
1.
Press .
2.
Use to select
"INPUT&OUTPUT",
and press
3.
Use to select
"Monitor Mixer",
and press
80
.
.
4.
Change parameters as
desired.
Mixing controls
Move cursor/change value:
Select parameter to change:
Parameter Setting range
Mute, −48.0 – +12dB
Volume
(in 0.5dB increments)
Panning L100 – CENTER – R100
NOTE
• The use of volume and panning settings only affect the
monitoring signal. They do not affect the recorded data.
• Use the Project Mixer to adjust the balance during play-
back. ( P .46)
Move up/down
Press
Explanation
Adjusts track volume
Adjusts left–right
position of sound.