Using As An Audio Interface - Zoom H6 Handy Recorder Operation Manual

Using as an audio interface

You can send signals input through the
the .
1.
Press .
2.
Use to select "USB",
and press
3.
Use to select
"Audio Interface",
and press
4.
Use to select "Stereo
Mix" or "Multi track",
and press
68
directly to a computer or iPad as well as output signals from that device through
.
.
.
NOTE
• Set to "Stereo Mix" , it is a 2 in/2 out interface. Set to "Multi
Track" it is a 6 in/2 out interface.
• With an iPad, use Stereo Mix mode. It will not work with
Multi Track mode.
• When using Stereo Mix mode you can use the recorder's
mixer to mix all track inputs to stereo. (
• When using Windows, a driver is necessary to use Multi
Track mode. You can download this driver from the ZOOM
website (www.zoom.co.jp).
5.
Use to select
"PC/Mac", "PC/MAC using
battery power" or "iPad
using battery power",
and press .
HINT
• When using a computer that does not provide enough
power through its USB bus and when using phantom
power, select "PC/Mac using battery power" .
• The "iPad using battery power" setting uses the batteries
in the recorder.
P .72)