Audio Interface Settings; Making Direct Monitoring Settings - Zoom H6 Handy Recorder Operation Manual

Audio interface settings

When using the as an audio interface, you can make the following
settings. Refer to each section for details.

Making direct monitoring settings

Sound that is input to the
it passes through the connected computer or iPad. This
enables monitoring without latency.
1.
Press .
2.
Use to select
"INPUT&OUTPUT",
and press
70
can be output directly before
.
Input settings Low cut filter (
Compressor/limiter (
Direct monitoring (
MS-RAW monitoring (
Phantom power (
Plug-in power (
Loop Back function (
Mixer (
VU meters (
Tool Tuner (
3.
Use to select
"Direct Monitor",
and press .
4.
Use to select
"On", and
press .
P .78)
P .79)
P .70)
P .82)
P .87)
P .88)
P .71)
P .72)
P .89)
P .74)