Preparation; Installing The Plasma Display - Sharp PZ-MR2X Operation Manual

Plasma display tv
Table of Contents

Advertisement

Preparation

Installing the Plasma Display

Over
50 cm
Over
10 cm
Locating
• Avoid the direct sunlight. Keep enough ventilation.
• The length of the system cable used to connect the
Plasma Display and the AVC System is about 3 m.
• Because the Plasma Display is heavy, be sure to
move it by more than two persons.
L
• If you place anything on top of the AVC System it will not
receive enough ventilation and not operate properly.
A
• Keep enough space around the upper and back parts
when installing in order to ensure ventilation around the
backside.
L
Operating Environment
Operating environment temperature and humidity: 0°C–
e40°C; 20–80%RH (cooling vents not blocked)
Avoid installing in the following locations:
• Under direct exposure to sunlight,
• Under strong artificial light,
• In high humidity,
• Under poor ventilation.
E-8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pz-50hv2Pz-43hv2Pz-mr2m

Table of Contents