Table of Contents
Advertisement
Useful adjustment settings
Auto Sync.
Adjusting the image
MENU
Option
Fine Sync.
H-Pos.
V-Pos.
Clock
Phase
Reset
RETURN
E-53
MENU
Option
Auto Sync.
Fine Sync.
Audio Out
[Fixed]
RETURN
32%
[0]
–90
+90
[0]
–60
+60
[0]
–90
+90
[0]
–20
+20
Auto Sync. adjustment (PC mode only)
For automatically adjusting the computer image.
1
Press MENU.
2
Press a/b to select "Option", and then press
ENTER.
3
Press a/b to select "Auto Sync.", and then press
ENTER.
• Auto Sync. starts and "Adjusting the image." displays.
A
• Return to the previous menu by pressing RETURN.
• When Auto Sync. is successful, "Auto Sync. completed
successfully" displays. If not, Auto Sync. failed.
• Auto Sync. may fail even if "Auto Sync. completed
successfully" displays.
• Auto Sync. may fail with a PC image composed of similar
patterns or monochrome. If not successful, change the
PC image and try again.
• Be sure to connect the computer to the AVC system and
switch it on before starting Auto Sync.
Fine Sync. adjustment (PC mode only)
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimise the image.
1
Press MENU.
2
Press a/b to select "Option", and then press
ENTER.
3
Press a/b to select "Fine Sync.", and then press
ENTER.
4
Press a/b to select the specific adjustment item.
5
Press c/d to adjust the item to your desired
position.
6
Press MENU to exit the menu.
A
• When all adjustments are set to factory preset values,
1 Press a/b to select "Reset", and then press ENTER.
2 Press a/b to select "Yes", and then press ENTER.
• Return to the previous menu by pressing RETURN.
Selected item
Centres the image by moving it to the left or
H-Pos.
right.
Centres the image by moving it to the up or
V-Pos.
down.
Clock
Adjusts the clock frequency.
Adjusts the clock phase.
Phase
Description
Advertisement
Table of Contents
