Preparation
a
Attaching the right speaker
Speaker bracket (upper part)
O headed screw
O headed screw
Speaker terminal
A
• Attach the spacer to the speaker along the grill
net.
P headed screw
Fasten the P headed
screws with the hexagon
E-9
Spacer
Speaker bracket
(lower part)
Spacer
Grill net
P headed screw
wrench.
Attaching the Speakers
1
Position the speaker brackets (upper and lower
parts) to the speaker, by firmly fastening the O
headed screws with a O screwdriver.
Speaker terminals are located on the lower part
of the speaker.
• The opening between the speaker parts and
Plasma Display can be filled with the spacer. Attach
the spacer to the speaker before positioning the
speaker brackets.
2
Loosely fasten the P headed screw to the
upper part of the Plasma Display with the
hexagon wrench. Hook the speaker on the
screw.
3
Loosely fasten the P headed screw to the lower
part of the Plasma Display with the hexagon
wrench.
4
Adjust the position so there is no unnecessary
opening between the speaker and the Plasma
Display. Fasten firmly the screws which loosely
fastened in step 2 and 3 above.
Secure the other speaker by taking the same
steps.
L
• Do not apply force to the front grill net, nor put your fingers
into it.
• Using fittings other than the ones supplied, may cause
reduction in performance or malfunction of the speakers.
Use the supplied fittings to fix the speakers to the unit.
• Do not carry or move the display by holding the speakers.
Hold the bottom of the display when carrying.
A
• For details on the speaker cable connection and the cable
routing, see pages 11 and 12.