Power Control; Power Control For Av Source - Sharp PZ-MR2X Operation Manual

Basic adjustment settings

Power control

Power Control setting allows you to reduce the display brightness to save energy.

Power control for AV source

MENU
Energy save
Power Control
When set to "Save", the power consumption is saved
Energy Save [Standard]
by decreasing picture brightness.
Standard
1
Save
2
3
4
5
A
• "Standard" is factory preset value.
• Return to the previous menu by pressing RETURN.
No Signal off
MENU
When set to "Enable", the power will automatically shut
Power Control
down if no signal inputs for 15 minutes.
No Signal off [Disable]
1
Disable
Enable
2
3
4
5
A
• "Disable" is factory preset value.
• Return to the previous menu by pressing RETURN.
• When a TV programme finishes, and the AVC System
No Operation off
MENU
When set to "Enable", the power will automatically shut
Power Control
down if no operation for 3 hours.
No Operation off [Disable]
1
Disable
Enable
2
3
4
5
A
• "Disable" is factory preset value.
• Return to the previous menu by pressing RETURN.
Press MENU.
Press a/b to select "Power Control", and then
press ENTER.
Press a/b to select "Energy Save", and then press
ENTER.
Press a/b to select "Save", and then press
ENTER.
Press MENU to exit the menu.
Press MENU.
Press a/b to select "Power Control", and then
press ENTER.
Press a/b to select "No Signal off", and then press
ENTER.
Press a/b to select "Enable", and then press
ENTER.
Press MENU to exit the menu.
• Five minutes before the power shuts down, hazard
warning displays every minute.
receives signal input, this function may not occur.
Press MENU.
Press a/b to select "Power Control", and then
press ENTER.
Press a/b to select "No Operation off", and then
press ENTER.
Press a/b to select "Enable", and then press
ENTER.
Press MENU to exit the menu.
• Five minutes before the power shuts down, hazard
warning displays every minute.
E-44