Power Control For Pc Source - Sharp PZ-MR2X Operation Manual

Basic adjustment settings
E-45

Power control for PC source

MENU
Power control allows you to reduce display brightness
Power Control
and save energy.
Energy Save [Standard]
Energy save
Standard
Save
1
2
3
4
5
A
• "Standard" is factory preset value.
• Return to the previous menu by pressing RETURN.
Power management
MENU
When set, the power will automatically shut down.
Power Control
1
Power Management [Off]
Off
2
Mode1
Mode2
3
4
5
A
• Return to the previous menu by pressing RETURN.
Press MENU.
Press a/b to select "Power Control", and then
press ENTER.
Press a/b to select "Energy Save", and then press
ENTER.
Press a/b to select "Save", and then press
ENTER.
Press MENU to exit the menu.
Press MENU.
Press a/b to select "Power Control", and then
press ENTER.
Press a/b to select "Power Management", and
then press ENTER.
Press a/b to select "Mode1" or "Mode2", and then
press ENTER.
Press MENU to exit the menu.
Selected item
• No power management
Off
• Factory preset value.
• If no signal inputs for 8 minutes, the power
shuts down.
• Even if you start using the computer and
the signal inputs again, the System stays
Mode1
off.
• The System turns on again by pressing B
on the Plasma Display or the remote control
unit.
• If no signal inputs for 8 seconds, the power
shuts down.
Mode2
• When you start using the computer and the
signal inputs again, the System turns on.
Description