Table of Contents
Advertisement
Useful adjustment settings
MENU
ENTER
/
/
Auto Sync.
Adjusting the image
MENU
Option
Fine Sync.
H-Pos.
V-Pos.
Clock
Phase
Reset
RETURN
Selected item
Centres the image by moving it to the left or
H-Pos.
right.
Centres the image by moving it to the up or
V-Pos.
down.
Clock
Adjusts the clock frequency.
Adjusts the clock phase.
Phase
MENU
Option
Auto Sync.
Fine Sync.
Audio Out
[Fixed]
RETURN
/
32%
[0]
–90
+90
[0]
–60
+60
[0]
–90
+90
[0]
–20
+20
Description
Auto Sync. adjustment (PC Input
mode only)
For automatically adjusting the computer image.
1
Press MENU.
2
Press a/b to select "Option", and then press
ENTER.
3
Press a/b to select "Auto Sync.", and then press
ENTER.
• Auto Sync. starts and "Adjusting the image" displays.
A
• Return to the previous menu by pressing RETURN.
• When Auto Sync. is successful, "Auto Sync completed
successfully" displays. If not, Auto Sync. failed.
• Auto Sync. may fail even if "Auto Sync completed
successfully" displays.
• Auto Sync. is likely to succeed when an input PC image
has wide vertical stripes (ex. pattern with high contrast
stripes, or cross-hatched).
It may fail when an input PC image is solid (low contrast).
• Be sure to connect the computer to the AVC System and
switch it on before starting Auto Sync.
Fine Sync. adjustment (PC Input mode
only)
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimise the image.
1
Press MENU.
2
Press a/b to select "Option", and then press
ENTER.
3
Press a/b to select "Fine Sync.", and then press
ENTER.
4
Press a/b to select the specific adjustment item.
5
Press c/d to adjust the item to your desired
position.
6
Press MENU to exit the menu.
A
• When all adjustments set to factory preset values,
1 Press a/b to select "Reset", and then press ENTER.
2 Press a/b to select "Yes", and then press ENTER.
• Return to the previous menu by pressing RETURN.
51
Advertisement
Table of Contents
