Nearby; Poi On Your Route; Displaying Pois Along The Route - Navigon 70 plus live User Manual

8.6

Nearby

During the navigation, or after having opened the map using the Show
Map button, you can have POIs, Favourites and traffic information of
the current map view shown in a clearly arranged list.
Note: This function is not available if the map was opened in one of the
modes Destination search, Preview or Reality View.
1. Tap on the map on a symbol which represents a POI, a favourite or
a traffic message.
The N
messages to be found in a small radius around the position on
which you have tapped.
2. Tap on an entry in the list in order to receive detailed information
about it.
You have the following options:
Tap on Interim Destination in order to set the selected point as an
►
interim destination. The navigation system will first guide you to this
interim destination. Afterwards you can continue navigation to your
original destination. The Interim Destination button is available in
navigation mode only.
Tap on Start Navigation in order to navigate to the selected point.
►
Tap on Cancel in order to close the list again.
►
8.7

POI on Your Route

Note: This function is available only during navigation in Vehicle mode
(refer to "Navigation in Vehicle mode" on page 57).
You can stipulate 3 categories of POIs for the POI on Your Route
function. POIs which lie along your route and match one of these
categories can be quickly displayed and selected as an interim
destination during the navigation.
8.7.1

Displaying POIs along the route

1. Tap on the
the top left of the map (refer to point 2 in "Navigation in Vehicle
mode" on page 57).
The POI on Your Route bar opens.
It shows symbols of the 3 stipulated categories of POI. The distance
to the nearest POI in each category is indicated. The marking along
Useful functions
list opens. It contains all the POIs, favourites or traffic
EARBY
(POI on Your Route) button which appears at
User's manual NAVIGON 70 Easy | 70 Plus Live
- 75 -