Useful Functions; Nearby - Navigon 83 series User Manual

Note: For details of how to enter the destination address using voice
commands refer to the chapter "Selecting the destination address by
voice command" on page 29.
The volume of the voice controls assistant can be controlled
independently of the volume of the navigation instructions. This means
you can still hear the speak prompts when you have muted the
navigation instructions.
1. In the N
Volume of the Assistant.
2. Select the volume for the assistant.
Note: For details of how to configure the navigation system refer to the
chapter "Configuring the NAVIGON 83xx" on page 78.
8

Useful functions

8.1

Nearby

During the navigation, or after having opened the map using the Show
Map button, you can have POIs, Favourites and traffic information of
the current map view shown in a clearly arranged list.
Note: This function is not available if the map was opened in one of the
modes Destination search, Preview or Reality View.
1. Tap on any point on the map.
The N
messages of the current map view.
2. Tap on an entry in the list in order to receive detailed information
about it.
You have the following options:
Tap on Interim Destination in order to set the selected point as an
►
interim destination. The navigation system will first guide you to this
interim destination. Afterwards you can continue navigation to your
original destination. The Interim Destination button is available in
navigation mode only.
Tap on Start Navigation in order to navigate to the selected point.
►
Tap on Cancel in order to close the list again.
►
Note: The Nearby function is available only if GPS reception is good
enough.
Useful functions
window tap on Options > Settings > General >
AVIGATION
list opens. It contains POIs, Favourites or traffic
EARBY
User's manual NAVIGON 83xx
- 57 -