Map In Standard Mode - Navigon 70 plus live User Manual

User's manual NAVIGON 70 Easy | 70 Plus Live
In the N
►
Reaction Speed in order to define how quickly or slowly the
proximity sensor is to respond to movements within its response
radius.
For information about problems with the proximity sensor and their
possible causes refer to "Troubleshooting" on page 102.
7.4

Map in Standard mode

The map is always in Standard mode when you are not navigating,
have not calculated a route and are not searching for a destination on
the map.
Under the following circumstances the map switches automatically to
Standard mode:
You begin a trip while the N
►
takes place after only a short while.
You reach the destination of a navigation in Vehicle mode.
►
To open the map:
In the N
►
Note: If GPS reception is not good enough to establish your location, the
map will be opened in Destination search mode.
The following features are typical for this view:
Indicated in the middle of the lower third is your current position
►
(orange arrow). The map view follows your movements so that your
position is always visible on the screen.
The scale of the map changes according to your speed.
►
- 54 -
window tap on Options > Settings > General >
AVIGATION
window tap on Show Map.
AVIGATION
window is open. The switch
AVIGATION
Working with the map