Navigon 70 plus live User Manual page 50

User's manual NAVIGON 70 Easy | 70 Plus Live
Save Destination: Saves the selected address in the F
"Saving destinations" on page 40).
Save Position: Opens the S
your current position under a certain name in the F
Save Route: Opens a window in which you can save the planned route under a
specific name (refer to "Saving routes" on page 44).
Saved Routes and Tracks: Opens a window in which you can load a saved
route or a track.
Settings: Opens the S
system (refer to "Configuring the navigation system" on page 95).
Show Map: Opens the map in Standard mode (refer to "Map in Standard
mode" on page 54).
Show on Map: Shows the selected address on the map.
Sightseeing Tours: Opens the S
select a sightseeing tour and start the navigation on a tour (refer to
"Sightseeing Tours" on page 79).
Simulation: Simulates a navigation on the route indicated. This simulation can
be performed without GPS reception. On multi-leg routes, only the first
leg is simulated.
Skip next destination: Tap on this button to omit the next route point. This button
is active only when at least 2 route points still lie ahead of you (refer to
"Tracks and multi-leg routes" on page 42).
Start Recording, Stop Recording: Starts or ends the recording of a track (refer
to "Tracks" on page 72)
Traffic: Opens the T
listed (refer to "TMC (Traffic Information)" on page 84).
Turn-by-Turn List: Shows detailed directions for the route, including all points at
which you must turn (refer to "Turn-by-Turn List" on page 82).
- 50 -
D
AVE ESTINATION AS
window. Here you can configure the navigation
ETTINGS
IGHTSEEING
I
RAFFIC NFORMATION
AVOURITES
window. Here you can save
AVOURITES
T window. There you can
OURS
window in which pending reports are
list (refer to
list.
Options